The universal programmable on-board controller is designed for monitoring light vehicles, reading and controlling car functions by receiving or transmitting information to the CAN bus. Allows you to simultaneously maintain a connection with 4 servers with different protocols of intersystem interaction: NDTP, Wialon IPS, Wialon Combine, Vega, EGTS, etc.
Cost: $170
Functional
✔ Support for Wialon IPS, Wialon Combine, EGTS, NDTP, Vega protocols;
✔ Simultaneous work with four servers using any of the supported protocols;
✔ Mobile application for configuration via ТСР and Bluetooth;
✔ Programming the response of the device to various events using the "Scenarios" function (up to 50 programmable scenarios);
✔ Configuration via GPRS, USB, SMS, Bluetooth;
✔ Software update via GPRS, USB;
✔ Remote configuration and viewing of the current state through a free engineering server;
✔ Support for analog, pulse and digital fuel level / consumption sensors;
✔ Driver identification using 1-Button keys;
✔ Temperature control in the engine compartment and inside the car using external 1-wire sensors;
✔ Control of executive mechanisms on command and upon the occurrence of events;
✔ Built-in black box for up to 200,000 entries;
✔ SMS notifications with broad customization options;
✔ GPS odometer;
✔ Control of geofences with the possibility of SMS notification and control of actuators (up to 50 configurable geofences);
✔ Trip counter;
✔ Detection of jamming GSM signal;
✔ Support for external JPEG camera;
✔ Transfer to the server and (or) recording into the internal non-volatile memory of information from the vehicle CAN bus;
✔ Control of vehicle functions via the CAN bus: locking / unlocking doors, unlocking the trunk, power windows, etc .;
✔ Sending a location-based alarm;
✔ Control of the driver's driving style using the built-in accelerometer;
✔ Remote diagnostics of the device status.
✔ Speakerphone
Attention!The display of this or that information by the Terminal is conditioned by the presence of such information in the CAN-bus of the vehicle itself
Parameters
Control functions
G32
Direction indicator control
✔
Alternative
control of direction indicators
✔
Closing the windows
✔
Locking all doors
✔
Unlocking the driver's door
✔
Unlocking all doors
✔
Alternative central locking
control
✔
Simulated opening the driver's
door
✔
Unlocking the trunk
✔
Factory siren control
✔
Management of regular autostart
✔
Controlling the standard
pre-heater
✔
Immobilizer (control of original
car buttons)
✔
Reading functions
G32
Egnition lock
✔
Key in the ignition lock
✔
Full-time protection status
✔
Standard alarm triggering
✔
Driver and passenger door
✔
Front passenger door
✔
Rear passenger doors
✔
Trunk
✔
Hood
✔
Hand brake
✔
Foot brake
✔
"Parking" state for vehicles with automatic transmission
✔
Engine running status
✔
Impulse when disarming the
standard guard (Slave)
✔
Impulse when armed
(Slave)
✔
Signal when reaching a speed of
more than 10 km / h
✔
Dynamic parameters:
G32
Engine temperature, ° С
✔
Total vehicle mileage, km
✔
Engine speed, rpm
✔
Vehicle speed, km / h
✔
Fuel level in the tank, l
✔
*Total fuel consumption, l.
(parameter available upon request)
✔
*Full engine running time, hour
(parameter is available upon request)