Functional CAN-PRO G
Universal programmable controller
                   
  • Русский (ru)
  • English (en)


  • Tekegram
  • Youtube
+7 (919) 892 40 51
+7 (906) 622 56 44

24-hour telephone technical 
support and sales department
Home
Products
Support
Contacts
Forum

Functional CAN-PRO G

 Controllers


 CAN-PROi U122


 CAN-PRO G


CAN-PRO G** CPU


Programmer PRG 02

Universal controller CAN-PRO / Functional CAN-PRO G

Controllers CAN-PRO G


Documentation

 

A universal programmable controller with analog reading and control of vehicle functions by receiving or transmitting information to the CAN bus is designed to optimize the installation of security systems.
Has a built-in Immobilizer controlled by standard vehicle buttons..


 

Module pin assignment

By clicking on the selected cell, you can learn more about the operation of the function

Connector X3 (10 pin)
pin.10
yellow
 Direction indicator control (input "+")
pin.9
white-red
 Locking all doors (entrance "-")
pin.8
white-black
 Unlocking the driver's door (entrance "-")
pin.7
white-purple
 Unlocking all doors (entrance "-")
pin.6
white-green
 Unlocking the trunk (input "-")
pin.5
light green-orange
 Closing the windows (performed with a 1.5 sec delay, input "-")
pin.4
light green-purple
 Start - Engine or Webasto (control of the standard system, input "-")
pin.3
light green-black
 Stop - Engine or Webasto (control of the standard system, input "-")
pin.2
white
 Simulated open drives doors / Standard siren / Sport. mode. in Volvo (input "-")
pin.1
rose-red
 Foot brake (output "+" with the ignition on)

Connector X2 (8 pin)

pin.8
blue
 Alternative control of сentral locking (exit "+" or "-")
pin.7
gray
 Alternative control of direction indicators (output "+" or "-")
pin.6
green
 CAN2-L (connect to the second 2-wire CAN-L bus)
pin.5
green-white
 CAN2-H (connect to second 2-wire CAN-H bus)
pin.4
brown
 CAN1-L (connect to the first 2-wire CAN-L bus)
pin.3
brown-white
 CAN1-H (connect to the first 2-wire CAN-H bus)
pin.2
black
 GROUND (module power supply)
pin.1
red
 + 12V (module power supply)

Connector X1 (15 pin)

pin.15
orange-black
 Key in the lock ("+" output, 100 mA)
pin.14
orange
 Ignition (output "+", 500 mA)
pin.13
brown-white
 Engine speed (pulses of negative polarity)
pin.12
yellow-black
 Engine operation status (output "-", disappears when the engine is started)
pin.11
brownish-yellow
 Speed control (output "-" at S> 10 km / h, reset - after ignition off)
pin.10
pink-black
 Parking (AT) or Hand brake (MT) (exit "-" with the ignition on)
pin.9
brown
 Immobilizer (exit "-" when pressing a combination of buttons in the vehicle)
pin.8
violet-white
 Standard key fob - Unlocking (negative impulse 500 ms.)
pin.7
violet-red
 Standard key fob - Locking (negative impulse 500 ms.)
pin.6
violet
 Full-time security status (exit "-" when the car is closed with the factory key fob)
pin.5
green
 Operation of the standard alarm (output "-" during an alarm)
pin.4
blue-red
 Hood sensor (output "-" when opening the hood)
pin.3
blue-yellow
 Trunk sensor (output "-" when opening the hood)
pin.2
blue-black
 Passenger door and rear door sensor (exit "-" when opening the door)
pin.1
light blue-blue
 Driver's door sensor (exit "-" when opening the door)